Axis Communications 660 manual Setting the IP address

20 Setup for Macintosh AXIS 560/660 User’s Guide

Macintosh

Setting the IP address

Follow the step-by-step procedure below to set the IP address, enabling access to the AXIS 560 via any standard Web browser:

1.Open the Chooser and select a network printer driver, any LaserWriter will do.

2.Select the Axis printer port which name ends with "_CFG" and close the Chooser.

3.Open a text editor, e.g. SimpleText and write a text file containing the following:

INT_ADDR: <IP address>

Example:

INT_ADDR: 171.16.2.143

4.Print the above text file. The settings will be stored in the AXIS 560.

5.Open the Chooser and select the printer port you wish to use for printing documents. Close the Chooser.

Note:

The _CFG port disappears 60 minutes after the AXIS 560 has been powered on. If you want it to reappear, you must restart the AXIS 560.