Axis Communications axis communications dome network camera Recipients, Schedules, Events

Models: axis communications dome network camera

1 62
Download 62 pages 63.74 Kb
Page 36
Image 36
Recipients

AXIS Q6035 PTZ Dome Network Camera

Events

To add additional criteria, select the Additional conditions option and add additional triggers. To prevent an action from being triggered repeatedly, a Wait at least time can be set. Enter the time in hours, minutes and seconds, during which the trigger should be ignored before the action rule can be activated again.

The recording Duration of some actions can be set to include time immediately before and after the event. Select Pre-trigger time and/or Post-trigger time and enter the number of seconds. When While the rule is active is enabled and the action is triggered again during the post-trigger time, the recording time will be extended with another post-trigger time period.

For more information, see the online help Recipient.

Recipients

Recipients receive media files and notification messages. The following recipients are available:

Recipient

Use with action

 

 

Email

Send Images

 

Send Notification

 

 

FTP

Send Images

 

 

HTTP

Send Images

 

Send Notification

 

 

Network Share

Send Images

 

 

TCP

Send Notification

 

 

Note

A network share can also be used as a storage device for recorded video. Go to System Options > Storage to configure a network share before setting up a continuous recording or an action rule to record video. See Storage, on page 46 for more information about storage devices.

To add a recipient:

1.Go to Events > Recipients and click Add.

2.Enter a descriptive name.

3.Select a recipient Type.

4.Enter the information needed for the recipient type.

5.Click Test to test the connection to the recipient.

6.Click OK.

Schedules

Schedules can be used as action rule triggers or as additional conditions, for example to record video if motion is detected outside office hours. Use one of the predefined schedules or create a new schedule as described below.

To create a new schedule:

1.Go to Events > Schedules and click Add.

2.Enter a descriptive name and the information needed for a daily, weekly, monthly or yearly schedule.

3.Click OK.

36

Page 36
Image 36
Axis Communications axis communications dome network camera user manual Recipients, Schedules, Use with action, Events