Axis Communications M1145L user manual Recipients, Fallback Action, Recipient Use with action

AXIS M1145–L Network Camera

Events

9.Optionally, select the Fallback action option to, for example, send an email notification if the recording does not start. See Fallback Action, on page 35.

To add additional criteria, select the Additional conditions option and add additional triggers. To prevent an action from being triggered repeatedly, a Wait at least time can be set. Enter the time in hours, minutes and seconds, during which the trigger should be ignored before the action rule can be activated again.

The recording Duration of some actions can be set to include time immediately before and after the event. Select Pre-trigger time and/or Post-trigger time and enter the number of seconds. When While the rule is active is enabled and the action is triggered again during the post-trigger time, the recording time will be extended with another post-trigger time period.

For more information, see the online help .

Fallback Action

A fallback action is started if the primary action cannot be started, for example if connection to a recipient cannot be established.

Fallback actions are typically used to send email notifications on failed actions or to upload images to a secondary recipient.

Recipients

Recipients receive media files and notification messages. The following recipients are available:

Recipient	Use with action
Email1	Send Images
	Send Notification
	Send Video Clip
FTP	Send Images
	Send Video Clip
HTTP	Send Images
	Send Notification
	Send Video Clip
HTTPS	Send Images
	Send Notification
	Send Video Clip
Network Share2	Send Images
	Send Video Clip
TCP	Send Notification

1.Some email providers have security filters that prevent users from receiving or viewing large amount of attachments, from receiving scheduled emails and similar. Check the email provider’s security policy to avoid delivery problems and locked email accounts.

2.A network share can also be used as a storage device for recorded video. Go System Options > Storage to configure a network share before setting up a continuous recording or an action rule to record video. See Storage, on page 47 for more information about storage devices.

To add a recipient:

1.Go to Events > Recipients and click Add.

2.Enter a descriptive name.

3.Select a recipient Type.

35