AXIS M5013 PTZ Dome Network Camera
Events
Events
The Axis product can be configured to perform actions when different events occur, for example, start a recording when motion is detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.
Available Action Rule triggers and conditions include:
•Applications — use installed applications to trigger the rule, see Applications, on page 25.
•Detectors
-Audio Detection — trigger the rule when audio is detected, see Audio detection, on page 24.
-Motion Detection — trigger the rule when motion is detected, see Motion Detection, on page 23.
•Hardware
-Network — trigger the rule if network connection is lost or restored. This can for example be used to start recording to the SD card.
-Temperature — trigger the rule if the temperature falls outside or inside the operating range of the product. This can for example be used to send maintenance notifications.
•Input Signal
-Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see Controls on the Live View page, on page 9 . This can for example be used to validate actions during product installation and configuration.
•PTZ
-Moving — trigger the rule when the camera view moves due to a PTZ operation. This can for example be used as an additional condition to prevent an action rule triggered by motion detection to record video while the camera view moves due to a PTZ operation.
-Preset Reached — trigger the rule when the camera stops at a preset position. This can be for example be used with the Send Images action to upload images from the preset position.
•Storage
-Available — trigger the rule when the storage device is unmounted or removed. This can for example be used to send maintenance notifications.
-Full — trigger the rule when the storage device is full. Under normal operation, the oldest recordings will be overwritten to prevent the storage device from becoming full.
-Locked — trigger the rule if the storage device is locked (write protected).
•System
-System Initializing — trigger the rule when the product is being started. This can for example be used to send a notification when the product restarts.
•Time
-Recurrence — trigger the rule periodically, see Recurrences, on page 28. This can for example be used to upload an image every 5 minutes.
-Use Schedule — trigger the rule according to the selected schedule, see Schedules, on page 28.
Available actions include:
•PTZ Control
26
