AXIS M7014/M7010 Installation Guide | Page 5 |
AXIS M7014/M7010 Video Encoder
Installation Guide
This installation guide provides instructions for installing the AXIS M7014/M7010 video encoder on your network. For all other aspects of using the product, please see the product’s User’s Manual, available on the CD included in this package, or from www.axis.com
Installation steps
Follow these steps to install the AXIS M7014/M7010 on your local network (LAN):
ENGLISH
1.Check the package contents against the list below.
2.Hardware overview. See page 6.
3.Install the hardware. See page 7.
4.Assign an IP address. See page 9.
5.Set the password. See page 12.
Package contents
Important!
This product must be used in compliance with local laws and regulations.
Item | Models/variants/notes |
|
|
Axis video encoder models | AXIS M7014 |
| AXIS M7010 |
|
|
Power adapter models | AXIS M7014: Type |
| AXIS M7010: Type |
|
|
Mounting kit | AXIS M7014 |
| • 4 screws and 4 plugs to mount the encoder to a concrete wall |
| AXIS M7010 |
| • 8 screws (for mounting with brackets) |
| • 2 mounting brackets |
| • 4 M6x20 screws for mounting in rack |
| AXIS M7014/M7010 |
| • 4 Surface protection pads |
| • Terminal block connectors |
| for AXIS M7014; 8 x 2 pin connector for AXIS M7010, Power: 2- |
| pin connector) |
|
|
CD | AXIS Network Video Product CD, including product documentation, |
| installation tools and other software |
|
|
Printed Materials | AXIS M7014/M7010 Installation Guide (this document) |
| Axis Warranty Document |
|
|
