Axis P3301 Fixed Dome Network Camera

Hardware Overview

Status	Green	Steady green for normal operation.

	Amber	Steady during startup and when restoring settings.

	Red	Slow flash for failed upgrade.

Power	Green	Normal operation.

	Amber	Flashes green/amber during firmware upgrade.

Note

•The Status LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options > Ports & Devices > LED. See the online help for more information.

•The Status LED can be configured to flash for identifying the unit. Go to Setup > System Options > Maintenance .

Page 7

Image 7

Axis Communications user manual Axis P3301 Fixed Dome Network Camera

Contents

Axis P3301 Fixed Dome Network Camera Intellectual Property Rights About this documentLegal Considerations Liability Learn More Support Axis P3301 Fixed Dome Network Camera Table of Contents For technical specifications, see Connectors and ButtonsHardware Overview LED Indicators Axis P3301 Fixed Dome Network Camera Access from a Browser Access the ProductStart a browser Internet Explorer, Firefox, Safari Set the Root Password Access from the InternetClick Create self-signed certificate Controls on the Live View Live ViewAxis Media Control viewer toolbar AMC Audio Controls Half-duplex mode Media Streams How to Stream H.264Axis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video Stream Java applet supports simplex audio with G.711 encoding Access Audio Streams Basic Setup Set Up the ProductFocus Adjustment Video Stream Video and AudioImage 264 Click Save to apply the new settings Stream Profiles Camera Settings Go to Video & Audio Video Stream and select the Image tab Iris adjustmentOverlay Overlay Image Privacy Mask Audio SettingsAudio Modes Audio Input Audio Output Audio Clips Default Viewer for Browsers Configure the Live View Output Buttons Viewer SettingsGo to Setup Live View Config User Defined Links For more information about I/O ports, see I/O Ports on Go to Detectors Camera Tampering DetectorsCamera Tampering Motion Detection Motion Detection Parameters Set Up Motion Detection Windows Recommended values Default valuesAudio Detection Low level 0% Applications Go to Events Action Rules and click Add Set Up Action RulesEvents Convert Event Types to Action Rules Add Recipients Set Up RecurrencesCreate Schedules Go to Recordings List RecordingsRecording List Continuous Recording Click Save to save and start the recording Users To log in again and be configured to use this functionalitySystem Options Security Certificates Date & TimeIeee Audio Support Network Basic TCP/IP SettingsIPv4 Address Configuration IPv6 Address Configuration Advanced TCP/IP Settings Link-Local IPv4 Address Select Use the host name to set the host name manuallyNAT traversal port mapping for IPv4 Smtp email QoS Quality of Service Bonjour StorageUPnPTM RTP/H.264 Port Status MaintenancePorts & Devices Ports Advanced Support Plain Config Reset to Factory Default SettingsFile Upload Check the Firmware TroubleshootingUpgrade the Firmware Firmware To upgrade the product’s firmware Product cannot be accessed from a browser Emergency Recovery ProcedureSymptoms, Possible Causes and Remedial Actions Problems setting the IP address Problems with streaming H.264 Product is accessible locally but not externallyBasic Settings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general Setup Video & Audio Camera Settings Technical Specifications Memory Power Function/group Specifications System ApplicationInstallation aids Maintenance Performance Considerations Accessories User license, smoked transparent cover Video M2.5