Axis Communications P5544 Hardware Overview, Connectors, For technical specifications, see

AXIS P5544 PTZ Dome Network Camera

Hardware Overview

Hardware Overview

1

4

3

5 6 7 8

2

1Part number (P/N) & Serial number (S/N)

2Network connector (PoE+)

3Panopsis lens

4Multi-connector

5Control button

6SD card slot

7Status LED indicator

8Restart button

Connectors

For technical specifications, see page 57.

Network connector - RJ-45 Ethernet connector. Supports Power over Ethernet Plus (PoE+) IEEE 802.3at. Use the supplied midspan.

NOTICE

Due to local regulations or the environmental and electrical conditions in which the product is to be used, a shielded network cable (STP) may be appropriate or required. Any network cables that are routed in outdoor environments or similar shall be shielded (STP) and intended for their specific use. Make sure that the midspan is properly grounded. See Electromagnetic Compatibility (EMC) for regulatory requirements.

SD card slot - A standard or high-capacity SD card (not included) can be used for local recording with removable storage.

NOTICE

To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to Setup > System Options > Storage > SD Card and click Unmount.

Control button - The control button is used for:

•Connecting to an AXIS Video Hosting System service. See page 42. To connect, press and hold the button for about 1 second until the Status LED flashes green.

5