AXIS P5544 PTZ Dome Network Camera
Hardwa re Overv iew• ConnectingtoAXISInternetDynamicDNSService.Seepage 42. To connect, press and hold the button for
about 3 seconds.
• Resetting the product to factory default settings. See page 49.
Restart button - Press to restart the product.
Multi-connector - Terminal connector for connecting external equipment:
• Audio equipment
• Input/Output (I/O) devices
• AC/DC power supply
When connecting external equipment, a multi-connector cable (available from Axis) is required in order to maintain the product’s IP
rating, see Multi-Connector Cable (sold separately), on page 50.
LED IndicatorsColor Indication
Unlit Connection and normal operation
Amber Steady during startup. Flashes during firmware upgrade.
Amber/red Flashes amber/red if network connection is unavailable or lost.
Red Flashes red for firmware upgrade failure.
Green Shows steady green for 10 seconds for normal operation after restart.
Midspan LED IndicatorsLED Color Indication
Unlit No camera connected.
Green Steady when camera connected, normal operation.
Green, flashing Slow flash when over current or short circuit condition on the port.
Port
Green, flashing Fast flash when input voltage is out of range or other internal error.
AC input Green Steady when AC power connected.
6