AXIS Q1602 Network Camera

Accessing the Product

Speaker button — Click to turn the speakers on or off.

Microphone button – Click to mute or unmute the microphone. In Simplex - speaker only mode, the Microphone and Talk buttons must both be active to send audio to the Axis product. Click either button to stop audio transmission.

Use the slider to control the volume of the speakers and the microphone.

Half-duplex mode

The Talk/Listen button is used to switch between sending and receiving audio. The button can be configured from the Audio tab in the AMC Control panel:

Push-To-Talk mode: Click and hold the button to talk/send. Release the button to listen.

Toggle mode: Click once to switch between talking and listening.

Simplex – speaker only mode

To send audio, the Talk and Microphone buttons must both be active. Click either button to stop audio transmission.

11

Page 11
Image 11
Axis Communications Q1602 user manual Speaker button Click to turn the speakers on or off, Half-duplex mode