Axis Communications Q6044-C user manual System Options Reset to Factory Default Settings

AXIS Q6044-C PTZ Dome Network Camera

System Options

Reset to Factory Default Settings

Important

Reset to factory default should be used with caution. A reset to factory default will reset all settings, including the IP address, to the factory default values.

Note

The installation and management software tools are available on the CD supplied with the product and from the support pages on www.axis.com/techsup

To reset the product to the factory default settings:

1.Press and hold the control button and the power button for about 15–30 seconds until the status LED indicator flashes amber. See Hardware Overview, on page 6 .

2.Release the control button but continue to hold down the power button until the status LED indicator turns green.

3.Release the power button and assemble the product.

4.The process is now complete. The product has been reset to the factory default settings. If no DHCP server is available on the network, the default IP address is 192.168.0.90

5.Using the installation and management software tools, assign an IP address, set the password and access the video stream. It is also possible to reset parameters to factory default via the web interface. Go to Setup > System Options > Maintenance.

56