Axis Communications Q6044-C user manual Performance Considerations, Power connector DC output

AXIS Q6044-C PTZ Dome Network Camera

Technical Specifications

Power connector (DC output)

Two 2-pin terminal blocks for power output (pin 4 is not used).

Function		Pin	Notes	Specifications
DC output	12 V DC	1, 2	Power out to camera	Max load = 6.5 A
				12.0–13.2 V DC, min 70 W
	GND	3	Ground
	N/a	4	N/a

Network connector (internal)

Two 2-pin Ethernet terminal blocks.

I/O terminal connector (external)

6-pin terminal blocks for:

•	Digital Input/Output
•	Power (DC output)
•	Ground (GND)
Function		Pin	Notes	Specifications
GND		1, 4, 6	Ground
DC output		2	Power out	12 V DC, 50 mA
Configurable I/O 1 (Input or		3	Digital input	0 to +30 V DC
Output)
			Digital output (transistor – open	Max load = 100 mA
			collector)	Max voltage = +30 V DC
Configurable I/O 2 (Input or		5	Digital input	0 to +30 V DC
Output)
			Digital output (transistor – open	Max load = 100 mA
			collector)	Max voltage = +30 V DC

I/O terminal connector (internal)

2-pin terminal block.

Performance Considerations

When settings up your system, it is important to consider how various settings and situations will affect performance. Some factors affect the amount of bandwidth (the bit rate) required, others can affect the frame rate, and some affect both. If the load on the CPU reaches its maximum, this will also affect the frame rate.

65