Axis Communications Q6044-C user manual Multi-Connector Cable, Function Pin wire Specifications

AXIS Q6044-C PTZ Dome Network Camera

Multi-Connector Cable

Multi-Connector Cable

The supplied multi-connector cable is required in order to maintain the camera’s IP rating.

Connect the multi-connector cable to the camera’s multi-connector and to the connectors in the supplied media converter switch, see page 6 .

The cable provides the following signals:

• DC power

• Network (Ethernet 10/100Base-T)

• Input/Output (I/O)

Function	Pin – wire		Notes	Specifications
Configurable (Input	2	– blue	Digital input – Connect to GND to activate, or	0 to +30 V DC
or Output)			leave floating (unconnected) to deactivate.
	7	– yellow	Digital output – Internal connection to ground	Max load =
			when activated, floating (unconnected) when	100 mA
			deactivated. If used with an external relay, a diode	Max voltage =
			must be connected in parallel with the load, for
				+30 V DC
			protection against voltage transients.
RX+	3	– green/white	Ethernet – receiving
RX-	4	– green	Ethernet – receiving
TX+	5	– orange/white	Ethernet – transmitting
TX-	6	– orange	Ethernet – transmitting
GND	8	– black	Ground
12 V power	1, 9 – red		Used to power camera	12–13.2 V DC
				Max load = 6 A

57