Page 6 | AXIS T91A Series Installation Guide |
Install the Hardware
Install the AXIS T91A61 Wall Mount
1.Refer to Hardware overview, on page 4 for information on the supplied parts.
2.Route the network cable through or along the wall.
3.Attach the bracket holder in the desired position using screws that are appropriate for the wall material and the weight of the camera and bracket.
4.The wall bracket can temporarily be hooked on the bracket holder, in order to easily route the cable through the bracket:
Locking tab
Tabs
Slide bracket between the | Swing wall bracket |
tabs on the bracket holder | to the side for |
| temporary support |
5. Route the necessary cables through the wall bracket, securing them in the cable holder.
Cable Cable holder
6.Pull the locking tab and unhook the wall bracket from the temporary position.
7.Use the Torx screws to secure the wall bracket to the bracket holder.
8.Refer to the Installation Guide for the network camera for instructions on how to attach the camera to the bracket.
