AXIS T91A Series Installation Guide

Page 7

Install the AXIS T91A62 Parapet Mount

1.Refer to Hardware overview, on page 4 for information on the supplied parts.

2.Route the network cable through or along the roof.

3.Attach the bracket holder in the desired position on the roof using screws that are appropriate for the material and the weight of the camera and bracket. Install the bracket maximum 80 mm (3.2 in.) from the edge of the roof for the camera’s outer diameter to be aligned with the edge of the roof. Maximum weight allowed 15 kg (33 lbs).

4.Route the necessary cables through the parapet bracket, securing them in the cable holder.

Note: Do not use bracket holder as a temporary support with the parapet bracket.

Cable holder

Cable

Bracket holder

Install bracket holder max. 80 mm (3.2 in.) from the edge of the roof

ENGLISH

Page 7
Image 7
Axis Communications t91a61 manual Install the Axis T91A62 Parapet Mount, Axis T91A Series Installation Guide