Attaching Cables, Installing Compact Flash Card and DIMM Upgrade Kit
Figure 3-29 Attaching a USB Device to the CM
2
1
STATUS
ACTIVE/
STANDBY
RESET
USB
3
1 USB device | 2 Control Module | 3 USB port |
Installing a Compact Flash Card
The Control Module provides an IDE port housing a 1 GB Flash memory card, as shown in Figure 3‐30. If the factory‐installed card fails or you want to install a new Type I Compact Flash card, simply pull the old card from its connector and insert the new card.
Figure 3-30 Installing Flash Card
STATUS
ACTIVE/
STANDBY
RESET
USB
ETHERNET
COM
2
31
1 Compact Flash card | 2 Connector | 3 Control Module |
