
English
Set the High Temperature Limit Stop (optional)
IMPORTANT: Many municipalities have codes limiting the maximum discharge temperature of a shower valve to 110° F
Tools Required:
Thermometer
3 mm Allen wrench (included with trim kit)
Turn the hot and cold supplies to the valve on. Turn the water on using the handle.
Use the 3 mm Allen wrench to loosen the set screw on the bottom of the handle. Remove the handle.
Remove the clip and stop ring from the thermostatic cartridge stem. Put them in a safe place.
Turn the thermostatic mixer stem with your fingers, clockwise to make the water cooler,
Reinstall the stop ring so that it is against the stop. Reinstall the clip. Justify and reinstall the handle.
11