3
Installation Considerations
For best results, Hansgrohe recommends that this unit be installed by a licensed, profes-
sional plumber.
Please read over these instructions thoroughly before beginning installation. Make sure
that you have all tools and supplies needed to complete the installation.
The supply hoses for this faucet require 3/8” compression fittings (included).
Protection against backflow provided by check valve.
•
•
•
•
Install the faucet
Snap the gooseneck spout into place on the faucet
body.
Place the sealing ring and faucet on the mounting
surface.
Install the plastic washer, fiber washer, friction
washer and mounting nut.
The plastic washer may be omitted if there
is insufficient space, or if the countertop is
thicker than 1 3/8”.
Tighten the mounting nut and tensioning screws.
English
Français – voir p. 7Español – ver p. 11
plastic washer
sealing ring
fiber washer
friction washer
mounting nut
tensioning screw