16

GETTING STARTED
Axxess® Model 8600 Phone User Guide – Axxess IP Mode
To receive a non-handsfree intercom call:
Lift the handset to respond to the caller.
NOTE: You must lift the handset if the caller has the Ring Intercom Always feature
(377) enabled.
To redirect a ringing call to another extension or to an outside number:
1. Press and dial .
2. Enter the extension or outside number to which you want to redirect the call. See
page 23 for more information.
Outside Calls
With outside calls, you can talk to people who aren’t members of your phone system.
When you make an outside call, however, you must dial any area codes or long dis-
tance digits that your telephone company requires.

Placing Outside Calls

To place an outside call:
1. Lift the handset and dial the Outgoing Call access code ( by default).
2. Dial the desired number.
NOTE: If you hear a single beep, you must dial an account code before you can
place your call (see page 48).
Depending on how your system is programmed, you may be able to use one of the
following methods to select an outgoing line, instead of dialing the Outgoing Call
access code:
• Dial a Select Line Group access code (the defaults are 92001-92208).
• Dial the Automatic Route Selection (ARS) access code (the default is 92000).
NOTE: Check with your system administrator to see if your system uses custom-
ized feature and access codes.
To request a callback (queue on to the line) if all outgoing lines are busy when you
try to call out:
When you hear busy signals, press and hang up. When the line is available, your
phone rings.
To cancel the queue request before your phone rings:
Press .
3 3 1
8
6
6
Hawk.book Page 16 Wednesday, November 5, 2003 1:05 PM