24
GETTING STARTED
Axxess® Model 8600 Phone User Guide – Axxess IP Mode
REDIALING A NUMBERThe redial feature allows you to redial the last outside number you dialed. Although
most phones redial the last number dialed, your system administrator can program
your phone to redial the last number saved.
To use the Last Number Dialed feature (if enabled):
Lift the handset and dial . A line is selected automatically, and the number
is dialed.
To use the Last Number Saved feature (if enabled):
• To save the last number dialed: While the phone is idle or while listening to inter-
com dial tone, dial .
• To redial the saved number: After selecting a line, dial . The number is
dialed automatically.
USING A HEADSETWith an electret headset, you can talk on the phone handsfree, without using your
speaker and microphone.
NOTE: If your headset has a power-saver mode, make sure the system administrator
has the Headset Connect Tone flag enabled in the telephone system. If this flag is not
enabled, you may miss the first few seconds of incoming calls.
To connect a headset:
1. Unplug the coiled handset cord from the base of the phone. (Leave the handset in
the cradle.)
2. Insert the headset plug into the vacant handset jack.
3. While on-hook, enter the Headset On feature code ( ) or the Headset
On/Off feature code ( ).
To disconnect a headset:
1. Unplug the headset cord from the base of the phone.
2. Plug the coiled handset cord into the vacant jack.
3. While on-hook, enter the Headset Off feature code ( ) or the Headset
On/Off feature code ( ).
NOTE: If using a headset, press to connect and disconnect calls.
380
380
380
315
317
316
317
Hawk.book Page 24 Wednesday, November 5, 2003 1:05 PM