RECEIVER SETUP/USE - 1201URX/AB or 1201URX/VM (continued)

Using either the UP or DOWN button [s] the desired receiving frequency or channel number can be set. Tapping the button steps the frequency or channel number one at a time while pressing and holding the button moves through the frequencies or channel numbers rapidly. There are 188 different frequencies or channel numbers to choose from. Once the desired frequency or channel has been determined be certain to set both the transmitter and the receiver to match.

D.Power:

The POWER ON/OFF switch [p] turns the 1201BT On and Off. To conserve battery life, it is best to turn the receiver ON only when it is actually being used.

E.Output:

Select either LINE or MIC [q] depending on which input is being used on the camera

F.Monitor:

This control [n] adjusts the output level (MIN to MAX) at the earphone moni- tor jack [k]. This is a 3.5mm mono jack.

G. LCD Display:

This display [o] shows several pieces of information. As discussed previ- ously, the frequency or channel number is shown. Additionally, as the diver- sity receiver chooses which antenna is receiving the best signal, The ‘A’ or ‘B’ segment of the LCD display will illuminate.

Using either the UP or DOWN button [s] the desired receiving frequency or channel number can be set. Tapping the button steps the frequency or channel number one at a time while pressing and holding the button moves through the frequencies or channel numbers rapidly. There are 188 different frequencies or channel numbers to choose from. Once the desired frequency or channel has been determined be certain to set both the transmitter and the receiver to match.

USING THE 1201 TRANSMITTER CONTROLS AND DISPLAY

A.Power:

The POWER ON/OFF switch [l] turns the 1201BT On and Off.

B.Audio:

Prior to turning the 1201BT ON it is best to set the AUDIO switch [n] to ST.BY. When ready to transmit, switch to ON. The ST.BY position acts as a “mute” that maintains the RF signal but turns off the audio.

C.MIC:

This 4-pin Hirose connector [o] is the microphone input. Azden produces a number of lapel, head-worn and neck-worn microphones that are specifically suited for the 1201BT. In addition, other externally powered (5VDC) electret condenser microphones can be used when they are properly wired with the correct Hirose connector) pin #1 is for audio +, pin #2 is not used, pin #3 is for bias voltage and pin #4 is ground). If you are using the 1201BT as a wireless instrument transmitter the connections are somewhat different (pin #1 is not used, pin #2 is audio +, pin #3 is for bias voltage and pin #4 is ground).

D.Input Level Adjustment:

This screwdriver adjustment [ * ] controls the level of the microphone. Counterclockwise rotation reduces the input gain while clockwise rotation increases the input gain.

E.Belt-Clip:

The metal belt-clip [j] provides a convenient method of attaching the trans- mitter to the user.

2

7

Page 5 Page 7
Page 6
Image 6
Azden 1201XT, 1201URX/Si, 1201BT, 1201URX/VM, 1201URX/AB specifications Using the 1201 Transmitter Controls and Display, Mic
Page 5 Page 7

1201BT, 1201URX/VM, 1201URX/Si, 1201URX/AB, Enhanced Broadcast Performance UHF Wireless System specifications

The Azden 1201XT Enhanced Broadcast Performance UHF Wireless System is an innovative solution designed for professionals in the audio and video production industries. This state-of-the-art system includes several models, including the 1201URX/AB, 1201URX/Si, and 1201URX/VM, each tailored to meet specific needs and preferences.

One of the standout features of the Azden 1201XT system is its UHF frequency range, which helps to minimize interference and deliver a stable, reliable signal even in challenging environments. With the ability to operate across a broad range of frequencies, users can easily find the clearest channel, ensuring optimum audio quality during recordings or broadcasts.

The 1201URX/AB is equipped with dual-channel receivers that allow for simultaneous operation of two transmitters. This is particularly beneficial for interviews or situations where multiple sound sources need to be captured without the hassle of switching between transmitters. The system boasts an impressive dynamic range, providing crystal-clear audio reproduction, making it suitable for both spoken word and musical performances.

On the other hand, the 1201URX/Si offers a compact design with an integrated LCD display that provides real-time information on frequency selection, battery status, and signal strength. This model is optimized for portable applications and is ideal for reporters and videographers who require mobility without sacrificing quality.

The 1201URX/VM model is designed specifically for video production and incorporates features such as a mini jack input for connecting popular cameras and devices, making it versatile for various setups. Additionally, the system uses advanced digital signal processing technologies to further enhance audio clarity, making it reliable for capturing dialogue and ambient sounds alike.

All models in the 1201XT system are built with durability in mind, featuring robust construction that withstands the rigors of professional use. The long battery life ensures extended operation without interruptions, allowing users to focus on their creative work instead of worrying about equipment performance.

In summary, the Azden 1201XT Enhanced Broadcast Performance UHF Wireless System presents a comprehensive solution for audio professionals. With its advanced features, robust technology, and user-friendly designs across its different models, it stands out as a dependable choice for anyone looking to elevate their audio capabilities. Whether for field interviews, video production, or on-stage performances, the 1201XT system delivers exceptional performance that meets the demands of modern broadcasting.
Top Page Image Contents