Using Your Remote
11
4. Once the correct code is confirmed, press the Device Button to store the
Set-Up Code number. PASS will appear in the LCD.
5. Test the remote control for your device. Try the POWER, CHANNEL
UP AND DOWN, VOLUME UP AND DOWN buttons, etc. If any of the
buttons do not perform as they should, please repeat the set-up from
Step 1 using the next Set-Up Code number for your device.
Note: Some audio and video devices have separate buttons for POWER ON and
POWER OFF. To operate these devices on the remote, press the corresponding
Device Button to turn the equipment ON and press the POWER button to
turn the equipment OFF.
6. Please repeat the above steps to program the remote control for each of
your other devices.
Recalling the Set-Up Code Number
To display the three-digit Set-Up Code number that was stored for a device.
1. Press the Device Button and MUTE button, simultaneously. SET will
appear in the LCD.
2. Press the OFF button. The LCD will quickly flash the three-digit Set-Up
Code number that was stored for your device in that mode.
3. Please write your Set-Up Code numbers in the chart below, for future
reference.