Important: Be careful when you handle the microprocessor and heat sink
. If the microprocessor and heat sink will be reused, do not contaminate the thermal material between them.
b.Tip the top of the heat sink toward the front of the server while you slide it away from the lower flange of the retention module; then, remove it from the server. After removal, place the heat sink on its side on a clean, flat surface.
1 | Heat sink locking lever |
2 | Microprocessor |
3 | Heat sink |
10.Release the microprocessor release lever 2 by pressing down on the end, moving it to the side, and slowly releasing it to the open (up) position.
11.Open the microprocessor bracket frame 1 by lifting up the tab on the top edge.
12.Carefully lift the microprocessor straight up and out of the socket, and place it on a
13.If you are instructed to return the microprocessor and heat sink, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.
