9.Insert the DIMM into the connector by aligning the edges of the DIMM with the slots at the ends of the DIMM connector1 and 2. Firmly press the DIMM straight down into the connector by applying pressure on both ends of the DIMM simultaneously. The retaining clips snap into the locked position when the DIMM is firmly seated in the connector. If there is a gap between the DIMM and the retaining clips, the DIMM has not been correctly installed. Open the retaining clips, remove the DIMM, and then reinsert it.
1 | DIMM 1 connector | 7 | DIMM 7 |
2 | DIMM 2 connector | 8 | DIMM 10 |
3 | DIMM 3 connector | 9 | DIMM 12 connector |
4 | DIMM 4 connector | 10 | DIMM 11 connector |
5 | DIMM 5 connector | 11 | DIMM 9 connector |
6 | DIMM 6 connector | 12 | DIMM 8 connector |
10.Rotate the
