Lenovo TD100X manual Your model

vFollow the suggested actions in the order in which they are listed in the Action column until the problem is solved.

vSee Chapter 3, “Parts listing, TD100 Types 6398, 6399, 6419, 6429, 4203, and 4206,” on page 25 to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU).

vIf an action step is preceded by “(Trained service technician only),” that step must be performed only by a trained service technician.

Error code	Description	Action
035-292-001	Adapter Parameter Set Error.	1.	Update the RAID controller firmware (see
			“Updating the firmware” on page 15).
		2.	Reseat the RAID controller.
		3.	Replace the RAID controller.
075-xxx-000	Failed power supply test.	Reseat the following components:
		1.	Hot-swap power supply.
		2.	Hot-swap power backplane.
		3.	Replace the following components (depending on
			your model):
			v Hot-swap power supply
			v (Trained service technician only) Non-hot-swap
			power supply
089-xxx-001	Failed microprocessor test.	1.	Make sure that the BIOS code is at the latest
			level.
		2.	(Trained service technician only) Reseat
			microprocessor 1.
		3.	Replace the following components one at a time,
			in the order shown, restarting the server each
			time.
			a. (Trained service technician only)
			Microprocessor 1
			b. (Trained service technician only) System
			board
089-xxx-002	Failed optional microprocessor test.	1.	Make sure that the BIOS code is at the latest
			level.
		2.	(Trained service technician only) Reseat
			microprocessor 2.
		3.	Replace the following components one at a time,
			in the order shown, restarting the server each
			time.
			a. (Trained service technician only)
			Microprocessor 2
			b. (Trained service technician only) System
			board

194ThinkServer TD100 and TD100x: Hardware Maintenance Manual