Turning the stabilizing feet

To rotate the front feet, complete the following steps.

Feet

1.Carefully position the server on a flat surface. The feet should hang over the edge of the flat surface to ease removal.

2.Press in on the clips to hold the feet in place; then, pry the feet away from the server. In some cases, you might need a screwdriver to pry the feet from the server.

Feet

3.Reinstall the feet in the opposite location. The tab on the feet should extend beyond the edge of the server.

80ThinkServer TD100 and TD100x: Hardware Maintenance Manual

Page 98
Image 98
Lenovo TD100X manual Turning the stabilizing feet