Lenovo TD100X manual Error code, Description, Action

vFollow the suggested actions in the order in which they are listed in the Action column until the problem is solved.

vSee Chapter 3, “Parts listing, TD100 Types 6398, 6399, 6419, 6429, 4203, and 4206,” on page 25 to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU).

vIf an action step is preceded by “(Trained service technician only),” that step must be performed only by a trained service technician.

Error code	Description	Action
162	Invalid configuration information or CMOS	1.	Run the Configuration/Setup Utility program,
	random-access memory (RAM) checksum
			select Load Default Settings, and save the
	failure.
			settings.
		2.	Clear CMOS memory. See “System-board
			switches” on page 14 for information about how
			to clear CMOS.
		3.	Reseat the following components:
			a.	Battery
			b. Failing device (If the device is a FRU, it must
				be reseated by a trained service technician
				only.)
		4.	Replace the following components one at a time,
			in the order shown, restarting the server each
			time:
			a.	Battery
			b. Failing device (If the device is a FRU, it must
				be replaced by a trained service technician
				only.)
			c. (Trained service technician only) System
				board
163	Time of day not set.	1.	Run the Configuration/Setup Utility program,
			select Load Default Settings, make sure that the
			date and time are correct, and save the settings.
		2.	Reseat the battery.
		3.	Clear CMOS memory. See “System-board
			switches” on page 14 for information about how
			to clear CMOS.
		4.	Replace the following components one at a time,
			in the order shown, restarting the server each
			time:
			a.	Battery
			b. (Trained service technician only) System
				board
175	Service processor flash code damaged or	1.	Restart the server.
	not loaded.
		2.	Update the optional Remote Supervisor Adapter II
			SlimLine firmware (see “Updating the firmware”
			on page 15.
		3.	Replace the optional Remote Supervisor Adapter
			II SlimLine.
		4.	(Trained service technician only) Replace the
			system board.

156ThinkServer TD100 and TD100x: Hardware Maintenance Manual