Lenovo TD100X manual IP@=aaa.aaa.aaa.aaa, Remote, client at IP@=yyy.yyy.yyy.yyy

vFollow the suggested actions in the order in which they are listed in the Action column until the problem is solved.

vSee Chapter 3, “Parts listing, TD100 Types 6398, 6399, 6419, 6429, 4203, and 4206,” on page 25 to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU).

vIf an action step is preceded by “(Trained service technician only),” that step must be performed only by a trained service technician.

System-error log message	Action
OS Watchdog response enabled by x	Information only.
PFA Alert, see preceding error in system error	Information only. See the preceding entry in the system-error log.
log
Possible ASM reset occurred -- reason unknown	Information only.
Power off	Information only.
Power on	Information only.
PPP[xxx] PPP-Cfg, Local-	Information only.
IP@=aaa.aaa.aaa.aaa, Remote-
IP@=bbb.bbb.bbb.bbb NetMsk=ccc.ccc.ccc.ccc,
Auth=ddd
PPP_1:Client Connected at xxx bps	Information only.
PPP_1:User requested to abort PPP interface	Information only.
Received alert from system x; type:y, sender’s	Information only.
ID:z
Remote access attempt failed	Information only.
Remote access attempt failed. Invalid userid or	Information only.
password received. Userid is ’x’ from WEB
browser at IP@=yyy.yyy.yyy.yyy
Remote access attempt failed. Invalid userid or	Information only.
password received. Userid is ’x’ from CMD
mode client at IP@=yyy.yyy.yyy.yyy
Remote access attempt failed. Invalid userid or	Information only.
password received. Userid is ’x’ from TELNET
client at IP@=yyy.yyy.yyy.yyy
Remote Login Successful. Login ID:	Information only.
Remote Login Successful. Login ID:’x’ from	Information only.
CMD mode client at IP@=yyy.yyy.yyy.yyy
Retried alert accepted from system x; type:y,	Information only.
sender’s ID:z
Retry count exceeded. Incorrect password	Information only.
entered too many times for userid w, x, y, z
RS485 broadcast from x ignored; more than y	Information only.
devices present on the RS485 network
RS485 connection to system x has ended	Information only.
RS485 network overload has cleared; x or fewer	Information only.
devices are present on the RS485 network
RSA x Became the ISMP Gateway	Information only.
Running the backup ASM main application	Information only.
Secondary Device Event[00 x UNKNOWN-y]	Information only.
Sending alert to remote system x; type:y, ID:z	Information only.

208ThinkServer TD100 and TD100x: Hardware Maintenance Manual