Installing the side cover
Attention: For proper cooling and airflow, replace the side cover before turning on the server. Operating the server for extended periods of time (more than 30 minutes) with the side cover removed might damage server components.
To install the side cover, complete the following steps.
1 | |
2 | Lock |
3 | Cover release latch |
1.Make sure that all cables, adapters, and other components are installed and seated correctly and that you have not left loose tools or parts inside the server. Also, make sure that all internal cables are correctly routed.
2.Insert the bottom edges of the cover into the inside of the chassis and rotate the cover toward the server.
3.Press down on the
4.Lock the side cover.
5.Reconnect the external cables and power cords; then, turn on the attached devices and turn on the server.
Chapter 4. Removing and replacing server components 79
