Lenovo TD100X manual ThinkServer TD100 and TD100x Hardware Maintenance Manual

vFollow the suggested actions in the order in which they are listed in the Action column until the problem is solved.

vSee Chapter 3, “Parts listing, TD100 Types 6398, 6399, 6419, 6429, 4203, and 4206,” on page 25 to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU).

vIf an action step is preceded by “(Trained service technician only),” that step must be performed only by a trained service technician.

Error code	Description	Action
1804	No more memory (below 1 MB for a PCI,	1.	Make sure that the settings for the adapter and all
	PCI-X, or PCI Express adapter).
			other adapters in the Configuration/Setup Utility
			program are correct.
		2.	If the error code indicates a particular PCI, PCI-X,
			or PCI Express slot or device, remove that
			device.
		3.	Reseat each adapter.
		4.	Replace the following components one at a time,
			in the order shown, restarting the server each
			time:
			a.	Adapter
			b. (Trained service technician only) System
				board
1805	PCI option ROM checksum error.	1.	Remove the failing adapter.
		2.	Reseat each adapter.
		3.	Replace the following components one at a time,
			in the order shown, restarting the server each
			time:
			a.	Adapter
			b. (Trained service technician only) System
				board
1806	PCI built-in self-test failure.	1.	Make sure that the settings for the adapter and all
			other adapters in the Configuration/Setup Utility
			program are correct.
		2.	If the error code indicates a particular PCI, PCI-X,
			or PCI Express slot or device, remove that
			device.
		3.	Reseat each adapter.
		4.	Replace the following components one at a time,
			in the order shown, restarting the server each
			time:
			a.	Adapter
			b. (Trained service technician only) System
				board

162ThinkServer TD100 and TD100x: Hardware Maintenance Manual