Installing a CD or DVD drive
To install a CD or DVD drive, complete the following steps:
1. If you are replacing a removed drive with a new drive, make sure that:
vYou have all the cables and other equipment that is specified in the documentation that comes with the new drive.
vYou check the instructions that come with the new drive to determine whether you must set any switches or jumpers in the drive.
vYou have removed the blue optical drive rails from the side of the old drive and have them available for installation on the new drive.
Note: If you are installing a drive that contains a laser, observe the following safety precaution.
Statement 3:
CAUTION:
When laser products (such as CD drives, DVD drives, fiber optic devices, or transmitters) are installed, note the following:
vDo not remove the covers. Removing the covers of the laser product could result in exposure to hazardous laser radiation. There are no serviceable parts inside the device.
vUse of controls or adjustments or performance of procedures other than those specified herein might result in hazardous radiation exposure.
DANGER
Some laser products contain an embedded Class 3A or Class 3B laser diode. Note the following.
Laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam.
Class 1 Laser Product
Laser Klasse 1
Laser Klass 1
Luokan 1 Laserlaite
`
Appareil A Laser de Classe 1
2.Rotate the
Chapter 4. Removing and replacing server components 87
