Lenovo TD100X manual Diagnostics

vFollow the suggested actions in the order in which they are listed in the Action column until the problem is solved.

vSee Chapter 3, “Parts listing, TD100 Types 6398, 6399, 6419, 6429, 4203, and 4206,” on page 25 to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU).

vIf an action step is preceded by “(Trained service technician only),” that step must be performed only by a trained service technician.

Error code	Description	Action
166-201-006	ISMP indicates I2C errors on bus O.	1.	(Trained service technician only) Control-panel
			assembly.
		2.	Replace the components one at a time, in the
			order shown, restarting the server each time:
			a. (Trained service technician only)
			Control-panel assembly.
			b. (Trained service technician only) System
			board
166-201-007	ISMP indicates I2C errors on bus M0.	1.	Reseat the DIMM.
		2.	Replace the following components one at a time,
			in the order shown, restarting the server each
			time:
			a. DIMM
			b. (Trained service technician only) System
			board
166-201-008	ISMP indicates I2C errors on bus M1.	1.	Reseat the DIMM.
		2.	Replace the following components one at a time,
			in the order shown, restarting the server each
			time:
			a. DIMM
			b. (Trained service technician only) System
			board
166-260-000	ASM restart failure.	1.	Disconnect all server and option power cords
			from the server, wait 30 seconds, reconnect the
			power cords, and retry.
		2.	Reseat the Remote Supervisor Adapter II
			SlimLine.
		3.	Replace the Remote Supervisor Adapter II
			SlimLine.
166-342-000	System management BIST indicates failed	1.	Disconnect all server and option power cords
	tests.
			from the server, wait 30 seconds, reconnect the
			power cords, and retry.
		2.	Reseat the Remote Supervisor Adapter II
			SlimLine.
		3.	Replace the Remote Supervisor Adapter II
			SlimLine.
166-400-000	ISMP Self Test Result failed tests: xxx	1.	Disconnect all server and option power cords
	where xxx=flash, ROM, or RAM.
			from the server, wait 30 seconds, reconnect the
			power cords, and retry.
		2.	Update the BMC firmware (see “Updating the
			firmware” on page 15).
		3.	(Trained service technician only) Replace the
			system board

Chapter 5. Diagnostics 197