Lenovo TD100X manual Error code, Description, Action, System x3400 Documentation CD

vFollow the suggested actions in the order in which they are listed in the Action column until the problem is solved.

vSee Chapter 3, “Parts listing, TD100 Types 6398, 6399, 6419, 6429, 4203, and 4206,” on page 25 to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU).

vIf an action step is preceded by “(Trained service technician only),” that step must be performed only by a trained service technician.

Error code	Description	Action
1801	A PCI adapter has requested memory	1.	Make sure that no devices have been disabled in
	resources that are not available.
			the Configuration/Setup Utility program.
		2.	Change the order of the adapters in the PCI,
			PCI-X, or PCI Express slots. Make sure that the
			startup (boot) device is positioned early in the
			scanning order. (For information about the
			scanning order, see the User’s Guide on the IBM
			System x3400 Documentation CD).
		3.	Make sure that the settings for the adapter and all
			other adapters in the Configuration/Setup Utility
			program are correct. If the memory resource
			settings are not correct, change them.
		4.	If all memory resources are being used, remove
			an adapter to make memory available to the
			adapter. Disabling the BIOS on the adapter
			should correct the error. See the documentation
			that comes with the adapter.
1802	No more I/O space is available for a PCI,	1.	Make sure that the settings for the adapter and all
	PCI-X, or PCI Express adapter.
			other adapters in the Configuration/Setup Utility
			program are correct.
		2.	If the error code indicates a particular PCI, PCI-X,
			or PCI Express slot or device, remove that
			device.
		3.	Reseat each adapter.
		4.	Replace the following components one at a time,
			in the order shown, restarting the server each
			time:
			a.	Adapter
			b. (Trained service technician only) System
				board
1803	No more memory (above 1 MB for a PCI,	1.	Make sure that the settings for the adapter and all
	PCI-X, or PCI Express adapter).
			other adapters in the Configuration/Setup Utility
			program are correct.
		2.	If the error code indicates a particular PCI, PCI-X,
			or PCI Express slot or device, remove that
			device.
		3.	Reseat each adapter.
		4.	Replace the following components one at a time,
			in the order shown, restarting the server each
			time:
			a.	Adapter
			b. (Trained service technician only) System
				board

Chapter 5. Diagnostics 161