REAR PANEL
The rec eiver ’s bac k panel is or ganized into groups of inputs and outputs f or audio and video as shown below. See
back of this manual for an enlarged view.
1. AC fuse holder - Holds the AC Line fuse. Replace only with same type and value.
2. AC input receptacle - For attaching the supplied AC power cord to the receiver.
3. IEEE 1394 input (optional) - For future interface applications.
4. Control outs - Outputs that allow you to remotely control external devices. (See “Making The Connection“).
5. IR in - Acc epts input from external IR receptor s. Connec t an IR repeater (“home run”) to IR IN for controlling the
receiver. T his m ethod of contr ol is usef ul when the front IR receptor is block ed ( for ex am ple, by a cabinet door) or
to control the receiver from another room. This input is typically used in place of an emitter attached to the front
panel.
6. RS-232 input - Computer interface applications.
7. Speaker outputs - Connections for your speakers.
Red binding posts
- speakers (+)
Black binding posts
- speakers (-)
8. DVD Audio inputs - Connections for a DVD audio or other 5.1 source device.
Red RCA jacks
- right front and surround audio inputs
White RCA jacks
- left front and surround audio inputs
Gray RCA jacks
- center and sub audio inputs
9. Surround outputs - Variable level outputs for driving external power amplifiers or powered speakers.
10. Antenna inputs - Connections for the AM and FM antennas.
11 p/n 12858 Rev. 0717A