MAKING THE CONNECTION

It’s tempting to just plug in your new A/V receiver and have great sound pour out. Before you do that, take a f ew
minutes to plan out how you want the receiver to fit into your audio/video system. Ask yourself the following
questions:
What source components do I want to connect to my receiver? (CD, VCR, etc.)
What equipment will be receiving the audio and video? (TV monitor, Speakers, etc.)
The answers to your questions deter mine how many cables you need to connect to the back of the r eceiver . G ood
preplanning equals great sound. Keep these recommendations in mind:
List all c omponents in your system and indic ate which j ac ks of the rec eiver eac h c omponent will be connec ted
to. Your receiver has seven sets of inputs. It is convenient to connect a DVD player to the input labeled DVD
or a VCR to the input labeled V1 or TAPE, etc. However, your equipm ent may differ from the labeling on the
back of your receiver. In most cases you can connect any type of source to any input (see FREQUENTLY
ASKED QUESTIONS). For example, if you don’t have a satellite receiver you can connect a DAT player or a
second cassette deck to SAT. You can also reprogram the source name that will appear on your receiver’s
front panel and on-screen display (see SYSTEM SETUP - INPUTS)
Also note the length of the cable for each component’s connection and describe how it should be routed or
draw your routing scheme below your list. You may want to label each cable with a name or number at both
ends. Use high quality connections to maintain high quality audio and video.
Think about the type and length of cable you need and obstacles in the cable’s path (doorways, furniture,
walkways, etc.). To decide which ones are right for you talk to your dealer about the various cable products
that are available.
For safety, keep all cables out of high traffic areas (hallways or doorways) and away from equipment that
radiates power, including amplifiers, power cords, heaters, etc.
If you might expand your audio/video system later, keep these ideas in mind as you plan current cable runs.
To provide the bes t tuner rec eption, mak e s ure the antenna is at leas t sever al f eet away from the rec eiver and
any other equipm ent that may produce high frequency interferenc e such as Personal c omputers, CD players,
halogen lamps, etc.
Tak e a look at the back panel of the rec eiver. You will notice that the RCA-type audio input and output connectors
are identified by colors, red for right channel and white for the left channel audio. Component video input and
output connectors are identified by Red/Green/Blue. Composite video input and output connectors are identified by
yellow. Coaxial digital inputs are identified by orange. The surround outputs are identified by Red/White/Grey.
13 p/n 12858 Rev. 0717A