SETUP

For best results, perform the following set up procedure when you initially install your receiver and anytime you
change or add sources, speakers, etc. or when you rearrange your listening area

THE MENU SYSTEM

Setup of your receiver will require you to navigate through the menu system. We recom m end that you use a video
monitor connected to the Zone 1 (A) output along with the remote control provided with your receiver. It is also
possible to set up your receiver from the front panel. Do not leave your video monitor on with the receiver in the
menu s ystem f or long periods of tim e. This can res ult in perm anently burning the m enu display into your monitor’s
screen. T his would take s everal hours so there is no danger of it happening during norm al setup procedur es. The
following are general instr uctions for using the m enu system . A com plete guide to the m enu system is inc luded at
the back of this manual.
MENU - If you are not already in the menu system , the MENU button will activate the menu system . Once you are
in the menu system, the MENU button will return you to the next higher level menu or, if you are already at the
highest level, it will exit from the menu system.
UP/DOWN ARROWS - Once you are in the menu system, use the UP/DOW N ARROW S to m ove to the desired
menu selection. The currently active menu line is highlighted in a contrasting color.
SEL (remot e) or ENT ER (remote or front panel) - Some menu selections cause another menu to be activated.
Use the UP/DOW N ARROWS to move to the desired menu line. Pressing SEL or ENTER will activate the next
menu.
NUMERIC KEYS (remote only) - From the remote control you may also go directly to a menu line by typing the
corresponding line number. If there is another menu below that line it will be activated immediately (no ENTER
required).
LEFT/RIGHT ARROWS (remote) or VOLUME KNOB (front panel) - Some menu s elec tions allow you to change
one of the receiver settings. Use the UP/DOWN ARROWS to move to the desired menu line. Pressing the
LEFT/RIG HT ARRO WS will change the setting. There are no LEFT /RIGHT ARROWS on the front panel. While in
the menu system , the VOLUME KNOB acts as the LEFT/RIG HT ARROW S. This m eans that you will not be able
to adjust the volume from the front panel while in the menu system. The rem ote control volume will work in m ost
menus.
TEXT EDITING - som e m enu selections will require you to edit text. Us e the UP/DOWN ARROW S to change the
current (blinking) character. Use the LEFT/RIGHT ARROW S (or VOLUME KNOB) to move to another character
position.
EXIT (remote only) - From the remote control you may instantly EXIT the menu system.
UNIVERSAL REMOTE - Remember that when you press a source button (DVD, CD, etc.) the remote now
controls the selected device. To return control to your receiver, you must press B&K or AUDIO. ALWAYS check
that your remote is set to B&K or (AUDIO) before attempting to control your receiver. B&K or (AUDIO) will
be displayed in the remote’s LCD window.
22 p/n 12858 Rev. 0717A