13258 11/01
65
From Remote From Front Panel Action
1
(PAUSE) or (STOP) (UP) or (DOWN) move to Zone 2 Setup (B)
2
SEL or ENTER ↵ (ENTER) activate ADVANCED ZONE B SETTINGS
Zone 2 (B) Level Control - You may wish to install an in-wall volume control in your second zone. This can
cause confusion between your processor’s internal Zone 2 (B) volum e controls and your in-wall controls.
WARNING - Setting Zone 2 (B) LEVEL CONTROL to FIXED will cause your processor to immediately send
its maximum Zone 2 (B) volume to your second zone (if Zone 2 (B) is on). Turn down your in-wall volume
controls before making this change.
From Remote From Front Panel Action
1
(PAUSE) or (STOP) (UP) or (DOWN) move to Level Control
2
X(REW) orW(FF) VOLUME KNOB adjust level to desired value
Zone 2 (B) Max (Fixed or Variable) Level - Z2 max level allows you to set a maximum volum e level f or Zone 2
(B). This is very useful if you are using speakers that can’t handle the maxim um power output f rom your exte rnal
amplifier or if you simply wish to limit the volume that can be achieved using normal front panel or remote
operation. If you have chosen Zone 2 (B) level control (fixed), then t his s ettin g be com es the f ixed lev el for Zone 2
(B). If you have chosen Zone 2 (B) level control (variable) then this setting all ows the level for Z one 2 (B) to be
adjusted. However, when adjusting this level it cannot exceed th e value set in Zone 2 (B) max level.
WARNING - If you set this level too low, the processor may appear broken (no sound).
From Remote From Front Panel Action