WARNING: All top rails MUST be straight and locked in position or child may become entrapped and suffocate.
See figure 9 and 10.
5. Place mattress in Playard with padded side up (Fig. 11).
NOTE: DO NOT insert mattress if using bassinet feature. Go to bassinet instructions.
Left
6.Feed the 6 Velcro straps (found underneath the mattress), 3 on each end of the mattress pad, through the slots on the bottom of the sides of the Playard. Fasten the Velcro tabs to the underside of Playard to prevent the mattress from moving (Fig. 12) (Fig. 13).
Insert
WARNING: To prevent child from axle from
outside
suffocating, Velcro straps MUST be secured to underside of Playard.
7. Attach the organizer, to any side of the playard, by pushing the plastic | Left |
| |
clips down over the top rail. (Fig. 14). The maximum weight capacity |
|
of the organizer is 3 pounds. |
|
8.To operate the brakes on the wheels, press downward on the brake lever as shown in figure 15. To release, lift upward on the lever.
Playard assembly is now complete and ready to use.
Outside Inside
Figure 7 | Figure 8 | Figure 9 | ||
|
|
|
|
|
Figure 5 | Right |
Insert axle from outside
Figure 5 | Right |
Figure 6
Figure 10
Figure 11 | Figure 12 | Figure 13 | Figure 14 | Figure 15 | 4 |
