Maintenance

IrDA Printer

Maintenance

WARNING! Remove all electrical connections before perform- ing any maintenance work.

Cleaning the Printer

External surfaces of the printer may be kept clean by simply wiping with a damp cloth. Do not use any solvents that may attack the plastic case. Be sure that the inside surfaces are kept dry at all times, and that the external surfaces are thoroughly dry before re-making any electrical connections.

Opening / Closing the Paper Cover

From underneath the printer, use your thumb and forefinger to push up on the paper cover until it releases from its latches (see Figure 2.)

Close the cover by pushing down until it snaps into place.

Cleaning the Print Head

To maintain a good print quality, it is recommended that the print head be cleaned at least once a year or up to once a month if the printer is used heavily. The print head should be cleaned immediately, however, if the print becomes visibly fainter due to contamination of the print head.

Clean the print head as follows:

Material Required:

Isopropyl Alcohol

Cotton swabs

Procedure:

1. Switch OFF printer.

CAUTION: Allow the print head to cool before cleaning, otherwise damage to the print head may occur.

2. Open paper cover and remove paper roll.

8

Instruction 24-9422

Page 12
Image 12
Bacharach 24-9422 manual Maintenance, Cleaning the Printer, Opening / Closing the Paper Cover, Cleaning the Print Head