Mechanical Burner Combustion Testing Kits
Combustion &
Environmental Analyzers
Bacharach® Combustion Testing Kits continue to offer you the most economical means of testing for oil burner efficiency during installation or servicing. Each kit is designed with the service technician in mind and contains the instruments listed in the ordering chart.
Oil Burner Combustion Testing Kits
Components
1.Fyrite® CO2 Indicator – The Fyrite Carbon Dioxide Indicator measures the percent CO2 in a flue gas sample.
2.True Spot® Smoke Tester and Oil Burner Smoke Scale – With the True Spot Smoke Tester and Smoke Scale, you can get an accurate indication of smoke content in flue gas.
3.Fire Efficiency Finder/Stack Loss Slide Rule – The Fire Efficiency Slide Rule is a quick and easy way of determining
combustion efficiency and stack loss from the results of the CO2 and stack temperature tests.
4.Tempoint® Dial Thermometer – High stack temperatures are cause for special concern and may indicate a serious condition.
5.Model MZF Draft Gauge – The intensity of draft determines the rate at which combustion gases pass through the boiler or furnace. With the MZF Draft Gauge, you can determine if draft is excessive or insufficient.
6.Draftrite® Draft Gauge – In some Oil Burner Combustion Testing Kits, the
7.Carrying Case – Instruments for Bacharach Oil Burner combustion Testing Kits come in a rugged, plastic carrying case.
Components
1.Fyrite® Indicators; CO2 and O2 – The Fyrite Indicators are utilized in conjunction with the Tempoint Dial thermometer to determine efficiency calculation with the Fire Efficiency Slide Rule.
2.Monoxor® CO Indicator – The Monoxor Indicator quickly and easily tests CO concentrations in flue gas samples.
3.Fire Efficiency Finder/Stack Loss Slide Rule – The Fire Efficiency Slide Rule provides a rapid and uncomplicated means of determining combustion efficiency and stack loss from the resultsof the CO2 and stack temperature tests.
Gas Burner Combustion Testing Kits
4.Draftrite® Draft Gauge – The
5.Tempoint® Dial Thermometer – With the Tempoint Dial Thermometer, you can obtain an accurate stack temperature of gas designed equipment.
6.Gas Service Calculator – The Gas Service Calculator determines the orifice size needed for fuel gas of any specific gravity and BTU value.
7.Gas Pressure Manometer – The Gas Pressure Manometer determines if gas input and gas pressure adjustments are within recommended limits.
8.Monoxor® Carbon Monoxide Detector – In some Testing Kits, the Monoxor Carbon Monoxide Detector replaces the Monoxor CO Indicator.
9.Carrying Case – Testing kit comes in a rugged, plastic carrying case.
Headquarters: 621 Hunt Valley Circle, New Kensington, PA 15068 U.S.A.
Phone:
