Bakers Pride Oven FKM-FC Item #, Description, Function, Electric Pressure Fryer, Operation

Electric Pressure Fryer		Operation
Item #	Description	Function
1	Spin Handle	Used to tighten the lid to the pot once it is latched.
2	Pop Safety Valve lever	Used to release pressure periodically to prevent the seat from
		sticking.
3	Pressure Gauge	Indicates the pressure inside the pot.
4	Computer	Used to program the cooking computer and activate the
		programs.
5	Rocker Switch	FILTER – When placed in this position, power is applied to the
		motor and shorting is pumped into the pot directly or thru the fill
		hose.
		OFF – When placed in this position, power is removed from both
		the pump motor and heating elements.
		FRY – When placed in this position, power is supplied to the
		thermostat and heating elements.
6	Thermostat Knob	Used to set the temperature of the shortening.
7	Thermostat Light	Illuminates red indicating that the heating elements are activated.
8	Digital Timer	The digital timer consists of an LED, display, beeper and 8
		buttons described below:
	LED indicator	Prior to the start of a timing cycle the LED will be OFF. When
		running a timing cycle the LED will flash. At the end of a timing
		cycle the LED will turn ON steady. When idle the LED is off.
	TIME SELECT (2	Two arrow buttons on the front panel are used to set the time.
	arrow buttons)	Hold the UP ARROW button down to increase the time. The
		longer the button is held down, the faster the rate at which the
		time will increase. The DOWN ARROW button is used in the
		same manner as the UP ARROW button except it will cause the
		time to decrease. The time is increased or decreased in 30-
		second increments.
	START/STOP	Starting the Timer - Pressing this button while the timer is not
	button	active will cause the timer to begin counting down the time on the
		display.
		Stopping the Timer - Pressing this button while the timer is
		active will stop the timer from counting down and display the
		remaining time. Time cannot be changed with the TIME SELECT
		buttons at this point. If this button is pressed again the timer will
		continue counting down from the point it was stopped.
		Resetting the Timer - Pressing and holding this button for longer
		than two (2) seconds will reset the timer and the display will return
		to the original starting time. At this point, time can be changed
		using the TIME SELECT buttons or the preset buttons.
		Canceling The STIR OIL Function - Pressing this button cancels
		the STIR OIL function while it is active.

12