Bakers Pride Oven FKM-FC service manual Electric Pressure Fryer Operation

Electric Pressure Fryer		Operation
Item #	Description	Function
8	ALARM button	This button allows the user to set an elapsed time at which the
		internal alarm will sound during a cycle. The time is set by
		pressing and holding the ALARM button while using the UP and
		DOWN arrows to change the time. The controller will limit the
		alarm time to be less than the currently programmed interval cycle
		time. The default alarm time is 0:00 which disables it. The ALARM
		time is saved on power down in the same manner as the last
		interval time. When a time cycle is running and the alarm time has
		elapsed the internal alarm will sound for 10 seconds. For
		example, a cycle time 10:00 and alarm time of 2:00 would cause
		the alarm to sound for 10 seconds once the controller has counted
		down from 10:00 to 8:00. This button is used to cancel the STIR
		OIL alarm. This button is also used to reconfigure the STIR OIL
		Function.
	A, B, C, D preset	These buttons are used to save and recall preset cycle and alarm
	buttons	times, saving operator time and minimizing error when changing
		interval cycle times and alarm times. To save the current interval
		and alarm times into one of the preset locations, press and hold
		the A, B, C, or D preset button for 2 seconds and the controller will
		double chirp to indicate the times have been saved. To recall any
		preset time, press and quickly release the appropriate button and
		the time values are loaded and displayed. These buttons are also
		used to reconfigure the STIR OIL function.
	Beeper	A beeper sounds when the timer counts down to 0. Pressing the
		START/STOP button stops the beeper and resets the timer
		causing the display to return to the original starting time. At this
		point, time can be changed using the TIME SELECT buttons or
		the preset buttons. The beeper will also sound for 10 seconds if
		the alarm time has elapsed during a timing cycle. When the STIR
		OIL function begins the beeper will sound until the ALARM or
		START/STOP button is pressed.
	Display	Used to display the time. It also displays the words “STIR” then
		“OIL” in .5 second intervals until the ALARM or START/STOP
		button is pressed.
9	High Limit Reset	Located under the control panel. If the heating elements inside the
	Switch	pot reach an unsafe temperature, power is automatically removed
		from the control panel and elements. Pressing this switch returns
		power to the control panel and elements.
10	Drain Lever	DRAIN OPEN – When placed in this position, the drain valve
		opens and shortening in the pot drains into the vat. Also power is
		removed from the control panel and elements.
		DRAIN CLOSED – When placed in this position, the drain valve is
		closed to prevent shortening from draining into the pot.
11	Fill Lever	FILL THRU POT – When placed in this position, shortening can
		be pumped automatically from the vat to the pot if the rocker
		switch is in the FILTER position.
		FILL THRU HOSE – When placed in this position, shortening can
		be pumped from the vat to the pot via a connected hose if the
		rocker switch is in the FILTER position.
12	Rinse Hose Connector	Used to connect the Rinse hose for cleaning and refilling the pot.
13	Pump Motor Reset	If the motor overheats while filtering, it will automatically shut off.
	Switch	Wait 15 minutes to allow motor to cool before pressing this switch.

13