Bakers Pride Oven VH1620E 5.If, D-ype, temperture, proerly,th, OPPOSITEcontrolsTurn, knobsON&OFF

THEOvenoughPROBLEMnothot	Temperature control not				THE SOLUTION
	THE CAUSEworkingproperly
	setting o low	Turn temperature control knob to right
		(clockwise)
	Cooking too s	Oven takes 30-40 minutes to get up to
		stabilized operating temperature.
		Turn temperature knobs back and forth.
		Do both lights go ON & OFF? If YES, then
		temperature controls are OK. If NO, then
		malfunctioning light indicates which control
		needs further investigation. Use the
		following steps to check.
		CAUTION: THE FOLLOWING TESTS
		ARE PERFORMED WITH LIVE POWER
		WITH CONTROL BOX OPEN. THESE
		TESTS TO BE PERFORMED ONLY BY
											further
									nee wire
		proerly,th					OPPOSITEcontrols)Turn			isbad.
		AN AUTHORIZED SERVICE AGENT.
		1 Locate the two temperature contols
		mounted					the hinged do r,
		ooling(Sfan. Ve fy that ALL								ections
		and con			ectors are prope ly faste ed and
		invetigationchart,4ReplaceleadsNOTE:tight.operIfNOT.bothresistance.sensorPoweridpolaritymperaturesensorsificationdiagram.shouldRereads-connectod,ofatbesvalueitive,backofconnectedsorsensorwithinsincetrol.manualforadsrangewirestonsorof
		terminals labeled 240 & VAC COM.
		isan			D-ype.
		2 Locate the two wires from each of
		5.If						aregood,swapsensor
		temperature						(top left terminals
			bew				controls.		temperture
		labeled PROBE)						These have braided
		knobsON&OFF.						Whicheverlightworks
		insulation. Verify their integrity
		3 necessary to test, disconnect one
		sensor		.		time, and use voltmeter to
		measure resistance sensor wires.
		Compare to resistance chart							back of this
		manual. If						show INFINITE
		resistance,						is bad. Replace.