Bakers Pride takes pride in the design and quality of our products. When used as intended and with proper care and maintenance, you will experience years of reliable operation from this equipment. To ensure best results, it is important that you carefully read and follow the instructions in this manual.

Installation and start-up should be performed by a qualified installer who has thoroughly read, understands and follows these instructions.

If you have questions concerning the installation, operation, maintenance or service of this product, contact our Technical Service Department at (800) 431-2745.

1. SAFETY PRECAUTIONS

Before installing and operating this equipment be sure everyone involved in its operation are fully trained and are aware of all precautions. Accidents and problems can result by a failure to follow fundamental rules and precautions.

The following words and symbols, found in this manual, alert you to hazards to the operator, service personnel or the equipment. The words are defined as follows:

!

DANGER: This symbol warns of imminent hazard which will result in serious injury or death.

!

 

 

 

!

WARNING: This symbol refers to a potential hazard or unsafe practice, which could result in

!

serious injury or death.

 

 

 

 

CAUTION: This symbol refers to a potential hazard or unsafe practice, which may result in minor or

!

! moderate injury or product or property damage.

 

 

 

!

NOTICE: This symbol refers to information that needs special attention or must be fully understood

!

even though not dangerous.

2. GENERAL INFORMATION

THIS MANUAL SHOULD BE RETAINED FOR FUTURE REFERENCE

CAUTION: These models are designed, built, and sold for commercial use. If these models are positioned so the general public can use the equipment make sure that cautions, warnings, and

! operating instructions are clearly posted near each unit so that anyone using the equipment will ! use it correctly and not injure themselves or harm the equipment.

!

WARNING: Check the data plate on this unit before installation. Connect the unit only to the voltage

!

and frequency listed on the data plate. Connect only to 1 or 3 phase as listed on the data plate.

 

 

 

 

WARNING: Electrical and grounding connections must comply with the applicable portions of the

!

! national electrical code and/or other local electrical codes.

 

 

 

!

WARNING: Disconnect device from electrical power supply and place a Tag Out-Lockout on the

!

power plug, indicating that you are working on the circuit.

WARNING: Install per the spacing requirements listed in the installation section of this manual. We strongly recommend having a competent professional install the equipment. A licensed electrician

! should make the electrical connections and connect power to the unit. Local codes should always !

be used when connecting these units to electrical power. In the absence of local codes, use the latest version of the National Electrical Code.

WARNING: This device should be safely and adequately grounded in accordance with local

codes, or in the absence of local codes, with the National Electrical code, ANSI/NFPA 70, Latest

!

Edition to protect the user from electrical shock. It requires a grounded system and a dedicated

!

circuit, protected by a fuse or circuit breaker of proper size and rating. Canadian installation must

 

comply with the Canadian Electrical Code, CSA C22.2, as applicable

 

3

Page 2 Page 4
Page 3
Image 3
Bakers Pride Oven VH1828G manual Safety Precautions, General Information
Page 2 Page 4

VH1828G specifications

The Bakers Pride Oven VH1828G stands out as a reliable and efficient baking solution, designed to meet the demanding needs of commercial kitchens and baking operations. With its robust construction and advanced features, it ensures that each baking session yields consistent and high-quality results, making it a favorite among professional bakers and chefs.

One of the key features of the VH1828G is its impressive capacity. This model comes equipped with multiple baking chambers, allowing for the simultaneous baking of a variety of products. Each chamber is designed for optimal airflow, ensuring even heat distribution throughout the baking process. This is particularly beneficial for establishments that require the flexibility to bake multiple items at once, such as breads, pastries, and pizzas.

The VH1828G utilizes a gas-fueled operation, which not only provides rapid heat-up and recovery times but also enhances energy efficiency. The dual-fuel capability ensures that operations can continue smoothly even in the event of a gas supply issue. This oven also features precise temperature controls, with independent thermostats for each baking chamber, allowing bakers to tailor the temperature settings based on specific product requirements.

Another significant characteristic of the VH1828G is its user-friendly design. The oven is equipped with easy-to-read digital displays and controls that enable operators to adjust settings with precision. Additionally, the oven’s stainless steel construction not only adds to its durability but also makes cleaning and maintenance a breeze. The removable shelves, easy-access grease filters, and smooth surfaces ensure that hygiene standards can be easily maintained.

The Bakers Pride Oven VH1828G incorporates advanced heating technologies, including a ceramic infrared burner, which provides rapid and even heating. This technology enhances the overall cooking performance, leading to perfectly baked goods with a desirable color and texture.

For establishments that prioritize safety, the VH1828G comes with built-in safety features that help prevent overheating and ensure a secure operating environment.

In summary, the Bakers Pride Oven VH1828G combines capacity, efficiency, and innovative technology, making it an excellent investment for any commercial kitchen seeking to enhance its baking operations. Whether you're baking artisan breads or delectable pastries, this oven delivers unbeatable performance and reliability.
Top Page Image Contents