©2007 Banner Engineering Corp. • 9714 Tenth Avenue North • Minneapolis, MN 55441 USA
763.544.3164 • Fax 763.544.3213 • Toll Free 1.888.3.SENSOR (1.888.373.6767) • www.bannerengineering.com/training
4
2
1
3
Supplemental Information
SureCross™ DX80 Wireless Devices - Changing IP Address in Windows 95, 98 & ME
Overview: To use Ethernet communication with the DX80 Gateway Pro, configure the IP address of your computer.
Procedure: To change the IP address of a Windows 95, 98, or ME computer, do the following:
Typical IP Address:
192.168.0.2
Default IP Address:
192.168.0.1
• Click the IP Address tab
• Write down the existing address of your PC before changing it:
• Choose Specify an IP Address
• Change the IP Address to 192.168.0.2
• Change the Subnet Mask to 255.255.255.0
• Click OK
• Reboot the PC
. . .
• Double-click the Network icon
• Click Start > Settings > Control Panel
• Scroll down the components list
• Click on your Network Card after TCP/IP
• Click on Properties
NOTE: There may be more than one TCP/IP component
on the list, so choose one that is similar to the
description of your Network Card.
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com