Easy to Apply Wireless Modules Go Where Other Systems Can’t.
The Banner SureCross Wireless System is a radio device network with integrated I/O that can operate in extreme environments while eliminating the need for costly wiring runs. The most basic SureCross network includes a Gateway system controller and one or more Nodes that monitor and/or control I/O in remote locations. Nodes are easily deployed throughout a facility, for gathering data to be concentrated at the Gateway. Installation is fast and easy with flexible mounting and power options. Nodes can be either
The Gateway can act as a master device in a star topology autonomously controlling input to output mapping, or a Modbus Slave in a host control system using
SureCross is distinctly superior to conventional wireless networks, facilitating sensing and actuation on the same network. Not to mention its ability to transmit the status of each I/O point and continuously monitor the health of each Node’s operational status and signal integrity.
NODE
12
SENSORS
NODE |
|
|
| SENSORS | |
13 |
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FlexPower
MODULE
900MHz
2.4GHz
SureCross offers easy, reliable communication between disparate products and processes in a single scalable and unified platform.
•Access
•Accommodates digital and analog I/O in a single unit
•Integrates with existing process or control networks
•Easy to retrofit, expand and relocate as needed
•900 MHz and 2.4 GHz models accommodate worldwide communication standards
•Reliable and secure Frequency Hopping Spread Spectrum (FHSS) protocol
•Bidirectional Rx/Tx communications between Gateway and Nodes
•Mobile, scalable and flexible
•Easy
•Rugged IP67/NEMA 6 design
•FlexPower™ supply options including battery and solar
5
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA
