Installation 8
The display is packed in a box on a pallet.
To unpack:
1. Cut the ribbons around the box by means of a
pair of wire-cutters.
2. Lift the box from the pallet.
The display remains standing on the pallet.
3. Remove the Accessory box and the upper
polystyrene piece.
4. Remove the plastic bag from the display.
5. Lift the display out of the lower polystyrene
piece.
Unpacking the display
Power connection 1. Power cord: Utilise a UL-listed detachable
power cord, 3-wire, type SJ or equivalent, 18
AWG min., rated 300 V min., provided with a
hospital-grade type plug 5-15P configuration
for 120V application, or 6-15P for 240V
application.
2. Plug one end of the power cord into the rear of
the display (connector LINE {9}). Plug the
other end into a grounded AC power outlet.
The display automatically adapts to the
voltage. The voltage range is:
100-240 VAC +/- 10%.