2. INSTALLATION
2.1Precautions
•Keep your original packaging. It is designed for this display and is the ideal protection during transport.
•Do not lift the display all by yourself to avoid injury.
•Avoid reflections in the picture tube to reduce eye strain.
•Place the display on a strong and stable table or desk if used as desktop display.
•Keep the display away from heat sources and provide enough ventilation in case it is built in a rack or console.
•Keep the display away from strong sources of magnetic fields.
•Make sure the display and computer are both switched off before connecting the signals.
2.2The package contents
•The display
•The accessory box (in which you found this manual)
Notes:
•The display can be part of a complete MeDis® system, consisting of the display itself, an imaging board and software. In that case, the package contains a lot more items. The contents of the package is then described in the manual of the complete system.
•The ambient light shield inside the accessory box should always be used during conformity calibration with the
Installation 12
