Barco R9001190 manual Load file, Random Access Adjustment Mode

Random Access Adjustment Mode

Before using a new source, a correct file has to be installed. The projector's memory contains a list of files corresponding to the most used sources. When the new source corresponds with one of these files, the file can be loaded and saved for future use. When there is a little difference, the file can also be loaded and than edited until the source specs are reached.

Highlight File Service by pushing the control disk up or down and

press ENTER to select. The File service menu will be displayed. ENTER displays the File Service menu;

EXIT returns to the Path selection menu.

ADJUST returns to operational mode.

The following file manupulations are possible :

-Load : installation of a file for a new source.

-Edit : editing a loaded file to the source specs.

-Rename : renaming a file.

-Copy : copying a file to a new file.

-Delete : deleting an existing file.

-Options : way of sorting the files.

File annotation :

xxxxxxxx.xxx x xxxxXxxxxi

i or blanc : i = interlaced, blanc = not interlaced

xxxxXxxxx : active pixel rating

x : source number

xxx: file extension, first character is C (for custom made files) or S (for standard files).

The second and third character is used for a following number (=file index)

file index for custom files : 00 to 63.

xxxxxxxx: base name, 8 characters.

RANDOM ACCESS

ADJUSTMENT MODE

FILE SERVICE

PICTURE TUNING

AUDIO TUNING

GEOMETRY

Select with	or
then	FILE SERVICE
<EXIT>

LOAD

EDIT

RENAME

COPY

DELETE

OPTIONS

Select with or then <ENTER> <EXIT> to return.

Load file

Push the control disk up or down to select LOAD and press ENTER to display the Load menu.

The Load menu displays the corresponding files depending on the installed filter.

This filter can be "Fit" or "All". To change the filter, push the control disk to the right to select "filter list" (filter list will be hightlighted) and press ENTER to toggle the annotation between brackets.

"All" : all files that can be loaded will be displayed.

"Fit" : only the best fitting files will be displayed (with a distinction of ± 2 lines and line duration distinction of ± 300 ns)

Push the control disk up or down to select the most fitting file and press ENTER to select.

When scrolling through the files, the image will be adapted according the settings of the selected file (on line adaptation). When the best fitting image is displayed, press ENTER to select this file. A confirm Load file menu will be displayed with the new created file and the on which the new file is based on.

Press ENTER to confirm your new creations or EXIT to return to the load file menu.

If the displayed image is not yet as it has to be, select the most corresponding file and go to the Edit menu to change the file settings.

During a load file, the actual active file is displayed next to the indication 'Active file'.

FILE SERVICE
	LOAD
	EDIT
RENAME
	COPY
Select with			LOAD FILE
		FILTER LIST [All]
then
	Filename		Src	Resolution
	-----------------------------------------------------
	pal	.s01	1	675x278i
	pal	.c01	1	675x278i
	secam	.s03	3	675x278i
	-----------------------------------------------------
	Active file : pal.c50
		Select with		or	,
		<ENTER> to accept
		<EXIT> to return.

<ENTER> to confirm

<EXIT> to return

7-2 5975398 BARCODATA 3200 110797