Installation Guidelines

2INSTALLATION GUIDELINES

Careful consideration of things as image size, ambient light level, projector placement and type of screen to use are critical to the optimum use of the projection system.

Max. ambient temperature : 40 °C.

Min. ambient temperature : 0 °C

The projector will not operate if ambient air temperature falls outside this range (0 °C - 40 °C)

* Environment

Do not install the projection system in a site near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust or humidity. Be aware that room heat rises to the ceiling; check that temperature near the installation site is not excessive.

* What about ambient light ?

The ambient light level of any room is made up of direct or indirect sunlight and the light fixtures in the room. The amount of ambient light will determine how bright the image will appear. So, avoid direct light

on the screen.			6FUHHQZLGWK
on the screen.
Windows that face the screen should be covered by opaque drapery

while the set is being viewed. It is desirable to install the projecting
system in a room whose walls and floor are of non-reflecting material.

The use of recessed ceiling lights and a method of dimming those
lights to an acceptable level is also important. Too much ambient light
results in a ‘wash out’ of the projected image. That appears as less
contrast between the darkest and lightest parts of the image. With
bigger screens, the ‘wash out’ becomes more important. As a general
rule, darken the room to the point where there is just sufficient light
to read or write comfortably. Spot lighting is desirable for illuminating
small areas so that interference with the screen is minimal.
* Which screen type?
There are two major categories of screens used for projection
equipment. Those used for front projected images and those for rear
projection applications.
projection applications.
Screens are rated by how much light they reflect (or transmit in the

case of rear projection systems) given a determined amount of light
projected toward them. The ‘GAIN’ of a screen is the term used. Front
and rear screens are both rated in terms of gain. The gain of screens
range from a white matte screen with a gain of 1 (x1) to a brushed
aluminized screen with a gain of 10 (x10) or more. The choice
between higher and lower gain screens is largely a matter of
personal preference and another consideration called the Viewing

angle.
In considering the type of screen to choose, determine where the

viewers will be located and go for the highest gain screen possible.
A high gain screen will provide a brighter picture but reduce the
viewing angle.
For more information about screens, contact your local screen
supplier.

* What image size? How big should the image be?

The BARCODATA 3200 is designed for projecting an image size from 1.00m (3.3ft) to 10.00m (32,81ft) with a aspect ratio of 4 to 3.

5975398 BARCODATA 3200 110797		2-1

R9001190 specifications

The Barco R9001190 is a high-performance projector designed specifically for cinema applications, renowned for its exceptional image quality and technological advancements. This projector is part of Barco's extensive range of digital cinema solutions, catering to the needs of modern theaters and entertainment venues seeking to provide a superior viewing experience.

One of the standout features of the R9001190 is its impressive brightness, capable of delivering up to 20,000 lumens. This high level of brightness ensures that images remain vibrant and clear, even in larger auditoriums where ambient light can dilute the viewing experience. The R9001190 is equipped with DLP (Digital Light Processing) technology, which enhances image precision and color accuracy. DLP is known for producing sharper images with higher contrast ratios, making it an ideal choice for cinematic presentations.

The projector uses a laser light source, providing several advantages over traditional lamp-based systems. Laser technology not only increases the projector's longevity and reliability but also enables a wider color gamut. This translates to richer, more dynamic colors, enhancing the overall visual experience. With consistent brightness levels throughout its lifespan, the R9001190 ensures that theaters do not have to frequently replace components, leading to reduced operational costs.

In addition to its superior image quality, the Barco R9001190 also incorporates advanced feature sets for enhanced functionality. It supports multiple industry standards such as DCI (Digital Cinema Initiative) and IMB (Integrated Media Block), ensuring compatibility with a wide range of cinema content. The projector is designed for easy integration into existing cinema systems, allowing for streamlined upgrades without extensive system overhauls.

Another notable characteristic of the R9001190 is its built-in cooling system, which efficiently manages heat dissipation, promoting longer operating times without performance degradation. Additionally, the projector is created with a modular design, facilitating serviceability and maintenance. This modular approach reduces downtime, allowing theaters to maintain high levels of operation without significant interruptions.

In summary, the Barco R9001190 is a cutting-edge digital cinema projector that combines high brightness, advanced DLP technology, and a durable laser light source to deliver an unparalleled movie-watching experience. Its integration capabilities, along with features designed for ease of maintenance, make it an essential choice for theaters aiming to provide audiences with immersive and visually stunning films.

Barco R9001190 manual Installation Guidelines

Models: R9001190

2INSTALLATION GUIDELINES