5. Start up of the adjustment mode
5. START UP OF THE ADJUSTMENT MODE
5.1 How to start up the adjustment mode
Start up using the RCU
1. Press the ADJUST key.
The projector displays the main menu. (menu 5-1)
MAIN MENU
Image control
Iris control
Sound control
Function keys
Service menus
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu 5-1
Start up using the local keypad
1. Press the ADJUST key.
The projector displays the General Access menu. (image 5-1)
2. Use the cursor keys to highlight entern ADJUST.
3. Press ENTER.
The projector displays the main menu (menu 5-1).
Image 5-1
To adjust the Analog picture controls with the local keypad while in the ’Adjustment mode’, press the ADJUST
key. The next General Access menu will be displayed.
Possible paths
Depending on the projector configuration the following paths are possible with the ’Main menu’.
• Image Control - Allows to change the color temperature of the image and to select another format (adjustment) for the image.
• IRIS-Control - This selection will only be available when the autoconvergence unit IRIS is built in into the projector. This control
will allow to align the projector automatically.
• Sound Control - Allows to select the sound mode (only when a sound unit is built in).
• Function Keys - Gives an overview of the programmed function for each key.
• Service Menus - Installation and adjustment menus to set up the projector. Before entering a warning will be displayed.
R5976584 BARCO CINE7 26022003 31